Product ID:MW, L-TEC SPOOLARC & OXWELD SOLID STEEL (SUP DAT)
MSDS Date:09/08/1995
FSC:3439
NIIN:00N080253
MSDS Number: CFQBC

ESAB GROUP INC

801 WILSON AVE
HANOVER, PA 17331
US

Emergency Phone: 717-637-8911

Info Phone: 717-637-8911

Cage: HO829

ESAB GROUP INC

517 HANOVER, PA 17331 US

Telephone: 717-637-8911

Cage: HO829

CARBON; (C)

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: <0.5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

IRON; (FE)

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BALANCE

OSHA PEL N/K

ACGIH TLV: N/K

MANGANESE; (MN) (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1-2%

OSHA PEL C 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST

SILICON; (SI)

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

MOLYBDENUM; (MO)

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.1%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

CHROMIUM; (CR) (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <1%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

VANADIUM; (V) (SARA 313)

CAS: 7440-62-2

RTECS: YW1355000

Fraction By Weight: <0.1%

OSHA PEL 0.05 MG/M3 (MFR)

ACGIH TLV: 0.05 MG/M3 (MFR)

IN ATM. REASONABLY EXPECTED DECOMP PRODS FROM NORM

RTECS: 9999999ZZ

WELL AS CARBON MONOXIDE & DIOXIDE, OZONE & NITROGEN

RTECS: 9999999ZZ

DECOMP PRODS IS BY SAMPLING & ANALYSIS. COMPOSITION

RTECS: 9999999ZZ

OBTAINED FROM INSIDE WELDER'S HELMET, IF WORN/IN

RTECS: 9999999ZZ

IRRIT OF NASAL MEMB & SKIN. NICKEL CMPDS

RTECS: 9999999ZZ

CHEST, FEVER, & ALLERGIC RXN. CHRONIC (LONG TERM)

RTECS: 9999999ZZ

LUNGS, CNDTN WHICH MAY BE SEEN AS DENSE AREAS ON

RTECS: 9999999ZZ

OF EXPOS. CHANGES ARE NOT NEC ASSOC W/SYMPS/SIGNS

RTECS: 9999999ZZ

NICKEL FUMES MAY ALSO CAUSE PULM FIBROSIS & EDEMA.

RTECS: 9999999ZZ

WHICH ARE LANGOUR, SPEEPINESS, MUSC WEAK, EMOTIONAL

RTECS: 9999999ZZ

FLUSH WITH COPIOUS AMOUNTS OF

RTECS: 9999999ZZ

LENS. AS A RULE OF THUMB, START W/SHADE WHICH IS

RTECS: 9999999ZZ

SHADE WHICH GIVES SUFFICIENT VIEW OF WELD ZONE.

RTECS: 9999999ZZ

SPKS & ELEC SHOCK. AT MIN, THIS INCL

RTECS: 9999999ZZ

APRONS, HATS, SHOULDER PROTECTION, AS WELL AS DARK

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES & GASES CAN BE DANGEROUS
TO HLTH. ELEC SHOCK CAN KILL. ARC RAYS CAN INJURE EYES & BURN SKIN.
NOISE CAN DMG HEARING. ABSORPTION BY SKIN CONT IS UNLIKELY. WHEN
PRODS ARE USED AS REC BY MFR, & VENT MAINTAINS EXPOS TO DECOMP
PRODSBELOW LIMS REC IN THIS SECTION, OVEREXP IS UNLIKELY. EFTS OF
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OVEREXP TO GASES, FUMES & DUSTS MAY
INCL IRRIT OF EYES, LUNGS, NOSE & THROAT. SOME TOX GASES ASSOC
W/WELDING MAY CAUSE PULM EDEMA, ASPHY, & DEATH. ACUTE OVEREXP MAY
INCL WATERY EYES, NOSE & THROAT IRRIT, HDCH, DIZZ, DFCLTY IN
BRTHG, FREQUENT COUGHING/CHEST PAIN. CHROMIUM/CHROMATE IN FUME CAN
CAUSE (ING 12)
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH ALLERGIES OR
IMPAIRED RESPIRATORY FUNCTION. SUCH REACTION CANNOT BE PREDICTED
DUE TO VARIATION IN COMPOSITION & QUANTITY OF DECOMPOSITION
PRODUCTS.

First Aid:IN CASE OF EMER, CALL FOR MED AID. EMPLOY FIRST AID
TECHNIQUES REC BY RED CROSS. INHAL: IF BRTHG IS DFCLT, GIVE OXYGEN
& CALL FOR MD. FOR ELEC SHOCK, DISCONNECT & TURN OFF POWER. IF NOT
BRTHG, BEGIN A RTF RESP, PREF MOUTH-TO-MOUTH. IF NO DETECTABLE
PULSE, BEGIN CPR. IMMED CALL MD. FOR ARC BURN, APPLY COLD, CLEAN
COMPRESSES & CALL MD. EYES: FLUSH W/POTABLE WATER FOR AT LEAST 15
MIN. SEE MD (ING 18)

Extinguishing Media:PROD WILL NOT BURN. USE EXTING MEDIA REC FOR
BURNING MATLS & FIRE SITUATION. CONT NEHC FOR MORE SPECIFIC INFO .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:ONLY THE PACKAGING FOR THIS PRODUCT WILL
BURN. HOWEVER, WELDING ARCS AND SPARKS CAN IGNITE COMBUSTIBLE AND
FLAMMABLE MATERIALS.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS AND TO INSULATE HIMSELF FROM WORK AND GROUND.
Other Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACES OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHAUST AT ARC/BOTH, TO KEEP FUMES &
GASES BELOW TLV IN WORKER'S BREATHING ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FSHLD W/FILTER (ING 19)
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR HEAD, HANDS & BODY PROT W/HELP TO PVNT INJURY FROM RADIA, (ING
21)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
TRADE NAME/PART #: WELDING ELECTRODES & RODS. HAZ DECOMP PROD: WORKED,
PROCESS, PROC & CONSUMABLES USED. OTHER CNDTNS INCL: COATINGS ON
MATL BEING WORKED, NUMBER OF WELDING OPERATIONS & VOL OF WORK AR
EA, QUALITY & AMT OF VENT, POSITION OF WORKERS HEAD W/RESPECT TO
FUME PLUME, AS WELL AS PRESENCE OF CONTAMINANTS (ING 8)

Appearance and Odor:COPPER-COATED OR BARE, SOLID STEEL WIRE OR ROD,
ODORLESS

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
MATL BEING (SUP DAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER, IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.